A three-way loudspeaker from the SEAS design, in a solid teak cabinet on Marid wood legs, with woodwork by Mahori Handcraft.

The acoustic design comes from the SEAS lab in Norway. We swapped the reference MDF cabinet for solid teak and made a single pair.

Storeglimt is a kit designed in the SEAS R&D lab, with SEAS Excel drivers on all three ways.
Mahori reworked the SEAS cabinet drawing as solid woodwork: a teak cabinet on Marid wood legs.
We built the cabinets and assembled the pair. The crossover uses the same values as the SEAS design, with Bevenbi parts throughout.

A light, stiff glass dome with the SEAS DXT waveguide for even treble dispersion.
A dome midrange with a neodymium motor, covering the range where voices and most instruments sit.
Two paper-cone woofers in a 100-litre vented enclosure with twin ports tuned to 28 Hz, as in the SEAS design.
Every board has its own grain, and this cabinet was made as a single pair.


On-axis at 1 m, from the measurement data SEAS published. Measured on the SEAS reference cabinet, not this teak pair. Our crossover uses the same values.

The crossover sits behind a clear acrylic panel, so every part is visible without opening the cabinet.
Every value follows the SEAS parts list: four capacitors, four inductors and three resistors.
All capacitors, inductors and resistors are from Bevenbi.
| System | |
| Type | Three-way floor-standing, vented |
| Acoustic design | SEAS Storeglimt |
| Bass enclosure | 100 L, twin ports tuned to 28 Hz (SEAS design) |
| Crossover | Passive, SEAS values, Bevenbi parts throughout |
| Drivers | |
| Tweeter | SEAS Excel Glimt T27GL001-DXT |
| Midrange | SEAS Excel M64F001 |
| Woofers | 2 × SEAS Excel W22NY003 |
| Cabinet and size | |
| Cabinet | Solid teak |
| Legs | Marid wood |
| Rear panel | Clear acrylic crossover window |
| Size (W × D × H) | 530 × 428 × 980 mm |
| Height on SoundCare feet | 1,030 mm |
| Availability | |
| Price | ฿800,000 per pair |
| Quantity | One pair only |
| Enquiries | PLT Speaker · pltspeaker.com |



